Broken Arrow Elite Drywall
(918) 359-4011 Get estimate

Drywall repair in Broken Arrow: Installation, patching, texture matching and ceilings

Broken Arrow Elite Drywall fixes damaged walls and ceilings across Broken Arrow and the Tulsa metro. That includes doorknob holes, cracks that open up at door and window corners, stains and sagging after a storm or a plumbing leak, popped screws, and seams where the tape has let go. We also hang, tape, and finish new drywall for remodels, additions, and commercial buildouts.

Most of our work is repair, and repair is where quality shows. Covering a hole is easy. The hard part is getting the patch to disappear into a knockdown or orange peel wall that has been repainted several times since the house was built. If the texture is off, you'll notice it every time the light hits that wall.

Most repairs take one visit. We put up dust containment before we cut anything, match the texture you already have, and clean up before we leave. Every job starts with an on-site look and a written quote.

(918) 359-4011

Get a free estimate

Tell us what's damaged and where. We'll call to set up an on-site look.

Drywall repair services

Small nail holes and serious water damage call for different fixes, so we match the method to the damage. Every repair includes texture matching, seam work, or full retexturing as needed, so the finished area blends in with the rest of the wall.

Cut-in drywall patch being screwed into place over a hole in a wall

Drywall hole & patch repair

Holes come from doorknobs, furniture, anchors pulled out of the wall, and the occasional moving-day accident. For smaller holes we use a mesh or cut-in patch, then build it up with joint compound and sand it flush.

For larger holes we cut back to the nearest studs and screw in a new piece of drywall so the patch has something solid behind it. The new piece matches your existing board's thickness so the surface stays even.

The price depends on how big the holes are and how many we fix in one trip. We look at every job in person before quoting.

Drywall finisher applying compound along the joint where the wall meets the ceiling

Drywall crack repair

Cracks come from settling, seasonal temperature swings, and age. For hairline cracks we use a flexible compound that moves with the wall instead of splitting again. Wider cracks get reinforced with mesh tape before the compound goes on.

The clay soils in and around Broken Arrow swell after heavy spring rains and shrink in late-summer droughts. The house moves a little with them, and that movement shows up as diagonal cracks off door frames, window corners, and the joint where the wall meets the ceiling. A crack in one of those spots usually means the framing is moving, not just the surface. We check the surrounding area first to tell whether the crack is cosmetic or a sign of something bigger.

After the repair we sand it and blend it into the existing texture. We also check nearby walls, because one crack is often part of a pattern.

Drywall contractor spraying texture over a patched wall to match the surrounding finish

Texture matching & retexturing

A patch is only finished when you can't pick it out. We match the texture on your walls and ceilings, including:

  • Orange peel
  • Knockdown
  • Popcorn (where retained)
  • Smooth finish
  • Hand-troweled or skip-trowel patterns

Before we finish the full repair, we test on a small area to confirm the match. Sometimes an exact match can't be done because the original product has changed over the years. In that case we'll tell you and recommend retexturing the whole wall or ceiling.

Retexturing is common after large repairs, water damage, or popcorn removal, because each of those leaves a surface that needs fresh texture anyway.

Worker in a respirator sanding a ceiling smooth with a dust-extracting pole sander

Popcorn ceiling removal

We wet the popcorn texture, scrape it off, and repair the drywall underneath. Removal usually uncovers small dings and seam problems, and we fix those before the new finish goes on.

Many of the older homes around the Rose District and central Broken Arrow have ceilings put up before the 1980s, and those can contain asbestos. We look at the material first and recommend testing before removal when there's any doubt. That step protects your household and keeps the job within safety guidelines.

Once the popcorn is gone, we apply a smooth or light-textured finish, whichever you prefer. The room looks more current, and the ceiling is much easier to clean and paint later.

Drywall finisher smoothing joint compound over a replaced section of ceiling

Water damage drywall repair

Roof leaks, plumbing failures, and flooding all ruin drywall. Heavy storms regularly send water through the ceilings of Tulsa-area homes. We remove the damaged board to head off mold, then check the studs and insulation for moisture before any new drywall goes up.

Stains, sagging, or board that feels soft to the touch all mean the drywall has to be replaced, not patched. We cut back until we reach dry, solid material so the repair lasts.

After the new board is in, we match the texture and paint as needed. If the leak itself hasn't been fixed, get that done first, or the damage will come back.

Drywall finisher applying joint compound over a taped ceiling seam

Sheetrock & drywall seam repair

Seams are where two drywall panels meet, and they're where you see visible lines, bubbling tape, and cracks. We pull the failed tape, re-tape and re-mud the joint, and feather it out so it disappears into the wall.

Seams usually fail because of poor original taping, humidity swings, or the house settling. We find the cause first so the seam doesn't open back up.

In long hallways and large rooms with a lot of seams, we check each seam from end to end, not just the part that's visibly cracked. That catches early failures before they turn into a bigger repair.

Ceiling repair

Ceilings get damaged by foundation movement, roof leaks, humidity, and age. Each cause needs a different fix. We diagnose the damage first, then match the materials and texture so the repair blends into the rest of the room.

Drywall finisher taping a vaulted ceiling with the windows sealed off by plastic sheeting

Drywall ceiling repair

We fix ceiling drywall damaged by leaks, impacts, and sagging seams. The first step is always removing the compromised material and checking for moisture or structural problems behind it.

Ceiling repairs we handle regularly:

  • Water stain removal and panel replacement
  • Popped nail or screw fastener repair
  • Seam separation and joint tape failure
  • Small to large hole patching
  • Full panel replacement for extensive damage

In bathrooms, kitchens, and other humid rooms, we use moisture-resistant board. Every repair gets taped, mudded, and sanded before texture goes on. We also check the surrounding area, because a damaged ceiling often points to a leak or a ventilation problem that needs its own fix.

Ceiling crack & sag repair

A cracked or sagging ceiling means either something above it is moving or the drywall itself is failing. The pattern and location of the cracks tell us whether the problem is cosmetic or structural.

A hairline crack along a seam is usually just failed tape or compound. A crack spreading from a corner, or a ceiling that dips between joists, usually points to moisture damage or not enough support.

How we handle it:

  • Identifying the root cause before starting repairs
  • Removing damaged sections that won't hold a patch
  • Reinforcing support where sagging has occurred
  • Applying new joint compound and tape
  • Sanding and priming for a smooth surface

We fix the cause before we fix the ceiling. Patching over a moisture problem or a shifting structure just means doing the repair again later.

Ceiling texture & finish matching

A ceiling repair isn't finished until the texture matches the rest of the ceiling. We work with popcorn, knockdown, orange peel, smooth, and hand-troweled finishes, and we match both the pattern and the density of what's already there.

An old texture that's been painted over several times is much harder to match than a fresh one. We test on a small area first, then do the full repair once the match is right.

After the texture dries, we prime and paint the repaired area to match the ceiling color. You shouldn't be able to tell where the repair was.

Drywall installation & hanging

We handle new drywall from start to finish: hanging the board, taping, finishing, and prepping walls for paint. We work on homes and commercial properties throughout Broken Arrow and adjust for the room, the wall height, and the finish level you want.

New construction room with drywall hung and taped on the walls and ceiling

New drywall installation

We install drywall for new construction, additions, and whole-room builds. We measure every space first and order only the material the job needs, which cuts waste and keeps the cost predictable.

Most walls get standard 1/2-inch board. Garages, shared walls, and ceilings get 5/8-inch fire-rated board where code calls for it. We cut and fit around outlets, vents, and fixtures so every panel sits flush.

We also plan which direction the panels run based on ceiling height and room layout. That decides how many seams need taping, and fewer seams usually means a smoother wall.

Installer on a step ladder fastening a new drywall panel to the ceiling

Drywall hanging

How the drywall is hung decides how well everything after it turns out. We screw each panel to the studs or ceiling joists at the manufacturer's recommended spacing, usually every 12 to 16 inches along the edges and across the field.

We check stud spacing before we start, because uneven framing makes panels sit crooked. We stagger the seams from row to row to reduce cracking, and we cut panels to fit tight around corners, windows, and door frames.

On ceilings, we use lifts or two-person holds so the board doesn't sag before it's fastened. Every panel gets checked for flush alignment before taping starts.

Two drywall finishers taping and mudding seams in a room under construction

Drywall taping & finishing

Once the panels are up, we tape and finish the seams for a smooth surface that's ready for paint. Joint compound goes on in several thin coats, with sanding between coats to knock down ridges and high spots.

What finishing includes:

  • Embedding paper or mesh tape into the first coat of compound
  • Applying a second coat to widen and smooth the seam
  • Adding a final skim coat for a seamless surface
  • Sanding the entire wall for an even texture
  • Matching texture to existing walls when doing repairs

Finish levels range from Level 3 to Level 5. Level 3 works for garages, storage areas, and walls that will be textured. Level 4 is the standard for most painted interior walls. Level 5 is worth the extra labor in rooms with strong side lighting or glossy paint, where every flaw shows. We recommend a level based on the room's lighting and how you'll use it.

Garage with newly hung and taped drywall on the walls and ceiling

Garage & utility space drywall

Garages, laundry rooms, and mudrooms have different needs than living spaces. On garage walls and ceilings that border living areas, we install 5/8-inch Type X fire-rated board. We finish garages to Level 3 instead of Level 5, because a textured wall hides dings from bikes, ladders, and car doors far better than a smooth one.

Laundry rooms, mudrooms, and utility closets get moisture-resistant board, with cement board behind any tile. Regular drywall in a room with steam or a leaky washer hookup will soften and fail at the bottom of the wall within a few years.

Remodeled room with new drywall around the windows ready for finishing

Remodel & addition drywall

Remodels and additions mean tying new drywall into old walls, so texture, thickness, and seam placement all have to line up. We identify the existing texture first, whether that's orange peel, knockdown, or smooth, so the new section blends in.

On additions, we make sure the new framing lines up with the old before any board goes up. That prevents a bumpy seam where the old and new sections meet.

We also patch and finish any areas opened up for electrical, plumbing, or HVAC work during the remodel. The goal is a wall that looks like it was always there.

Commercial drywall services

Commercial drywall comes with tighter schedules, stricter codes, and more square footage than residential work. We handle repairs, new installations, tenant buildouts, and specialty assemblies for offices, retail stores, and other commercial properties in Broken Arrow.

Commercial interior with patched and taped drywall walls and doorways

Commercial drywall repair

Commercial walls take harder wear than walls at home. Foot traffic, moving equipment, and frequent reconfigurations all cause dents, cracks, and water damage.

We assess the damage, then match the texture and finish so the repair blends in. When a business needs it, we can work evenings or weekends so it stays open during the repair.

Typical commercial repairs:

  • Patching holes from fixtures, signage, or equipment
  • Fixing water-damaged ceiling tiles and wall sections
  • Repairing cracks from building settling
  • Restoring walls after electrical or plumbing work

We use commercial-grade compound and matching texture techniques so repairs hold up under daily use.

Stack of drywall sheets on a pallet inside a commercial space under construction

Commercial drywall installation

New commercial construction and major renovations need drywall installed exactly to spec. We work from the plans and coordinate with general contractors, electricians, and other trades to keep the schedule on track.

Installation covers checking the framing, hanging the board, taping, mudding, and sanding to the finish level the project calls for. Commercial jobs often require Level 4 or Level 5, especially in visible areas or under demanding lighting.

We use standard gypsum board or moisture-resistant and impact-resistant panels, depending on what the room is for. Warehouses, restaurants, medical offices, and retail spaces each have their own structural and code requirements, and we choose materials to match.

Interior buildout with new drywall partition walls and openings

Office & retail tenant improvements

Tenant improvements rework an existing space to fit a new business's layout. That can mean adding partition walls, taking walls out, or building a full floor plan inside an empty shell.

We work with property managers and business owners to hit lease deadlines. Retail buildouts are usually the most time-sensitive, because every day a store opens late costs the tenant revenue.

Tenant improvement work includes partition walls for offices and private rooms, wall removal for open floor plans, ceiling grid drywall for retail and restaurant spaces, and custom soffits and bulkheads that hide HVAC or add design detail.

Because tenant improvements often happen in occupied buildings, we keep dust containment up for the whole project.

Commercial space with drywall hung under an open steel ceiling and a scissor lift

Fire-rated & soundproof drywall

Building codes often require fire-rated drywall assemblies in stairwells, mechanical rooms, and walls between tenant spaces. We install Type X and Type C gypsum board rated for one-hour or two-hour fire resistance, depending on the application.

In multi-tenant offices, medical facilities, and conference rooms, sound control matters for privacy. We use double-layer drywall, resilient channel, and acoustic sealant to cut down on noise between rooms.

Fire-rated and soundproof assemblies only perform as rated when they're installed to the manufacturer's specs. We follow those specs closely and can provide documentation for inspections.

Why Broken Arrow chooses us as their drywall company

"Elite" is in our name because it's the standard we hold ourselves to. Here's what you can expect on every job:

  • A written quote before any work starts. We look at the damage in person and give you an itemized price, not a phone guess.
  • The cause found first. We track down the leak, settling, or seam failure behind the damage so the repair doesn't come back.
  • Dust contained before we cut. We seal off the work area and cover floors and furniture first.
  • Texture tested before we finish. We confirm the match on a small area before completing the full repair.
  • The right board for each room. That means moisture-resistant, fire-rated, or cement board wherever the room needs it.
  • Clean when we leave. We haul off the debris, and the room is ready to use.

Which drywall materials & finishes do we use?

We pick materials based on the room and its conditions. Most interior walls get standard 1/2-inch board. Bathrooms, kitchens, and laundry rooms get moisture-resistant board, with cement board behind tile in wet areas.

Garages, basements, and walls near fireplaces get 5/8-inch Type X fire-rated or impact-resistant board when code requires it or the homeowner asks for it. Curved walls and archways get 1/4-inch board, which bends without cracking.

For finishes, we use Level 3 on textured walls and garages, Level 4 on standard painted walls, and Level 5 where glossy paint or strong side light would show every flaw. We match knockdown, orange peel, and smooth textures so the repair disappears once it's painted.

Fire-rated Type X drywall panels installed on a wall

Planning & timeline

Drywall projects go through a few distinct phases. Knowing what happens in each one makes it easier for homeowners and contractors to plan around the work. Here's the usual sequence from delivery to final finish.

Drywall installation timeline: what to expect at each stage

Every project breaks into four stages, and how long each one takes depends on the size of the space.

  1. Delivery and prep: we measure, order the right board thickness, stage materials on-site, and inspect the framing.
  2. Hanging: we cut and fasten panels to the studs or joists. This takes longer in large commercial spaces and rooms with tall ceilings.
  3. Taping and mudding: usually three coats, with about 24 hours of drying time between coats.
  4. Sanding and finishing: we sand the seams smooth and prep the walls for primer or texture.
StageTypical duration
Delivery & prep1 day
Hanging1–3 days
Taping & mudding2–4 days
Sanding & finishing1–2 days

Most standard rooms are done within a week. Larger projects can take longer depending on scope.

Cost & budget

Drywall pricing in Broken Arrow depends on square footage, ceiling height, and finish level. A small repair costs a fraction of a full-room install. We quote both in person, not over the phone.

Drywall repair cost guide: what affects the price

A handful of factors drive every quote:

  • Size of the damaged area: small patches cost less than large sections that need new sheets.
  • Ceiling height: vaulted or high ceilings take more labor and equipment.
  • Type of drywall: moisture-resistant or fire-rated board costs more than standard panels.
  • Finish level: a smooth, paint-ready finish takes more time than a basic texture match.
  • Access to the area: repairs behind furniture, in tight closets, or above stairwells add labor time.
  • Texture difficulty: an old, repainted hand-troweled texture takes longer to match than standard orange peel.

Estimates are free and done in your home. Seeing the damage in person lets us give you an accurate, itemized price instead of a rough guess.

Request estimate

Proudly serving Broken Arrow and nearby areas

We work throughout Broken Arrow and the surrounding Tulsa metro, including Tulsa, Bixby, Jenks, Coweta, Wagoner, Owasso, Catoosa, and Haskell. If you're just outside that area, call us anyway. We regularly take jobs in nearby towns.

Frequently asked questions

What does your drywall repair process involve?

Every job starts with an on-site inspection to see the damage and figure out what caused it. A water stain, crack, or hole is often a symptom of something else, like a slow leak or a settling foundation. Once we know the scope, we give you a written quote before any work begins. From there:

  • Assessment: we inspect the damaged area and surrounding surfaces.
  • Containment: we seal off the work area and protect floors and furnishings before cutting.
  • Preparation: we remove damaged material and clean the work area.
  • Repair: we patch, tape, or replace drywall sections as needed.
  • Finishing: we sand and texture-match the repair to blend with existing walls.
  • Cleanup: we remove debris and leave the space ready to use.

We keep you updated at each stage, so there are no surprises.

How long does drywall repair take?

Most small and medium patches are done in one visit. Larger repairs take two or three days. The work itself isn't slow, but joint compound has to cure between coats. Rushing it is why patches crack or show through the paint later. Texture matching and priming add a few hours on the last day.

Is drywall repair cheaper than full replacement?

Almost always. Repairing the damaged sections costs a fraction of tearing out and rehanging a whole wall or ceiling. Replacement only makes sense when the damage is widespread: heavy water saturation, mold behind the board, or so many failed seams that patching each one costs more than starting over. We'll tell you which situation you're in during the estimate.

Does homeowners insurance cover drywall repair?

Usually, when the damage is sudden and accidental, like a burst pipe, a storm-damaged roof, or an appliance failure. Insurance typically won't cover damage from long-term leaks, ongoing humidity, or deferred maintenance, since those count as neglect rather than a covered event. We provide detailed documentation and photos to support your claim.

Can you match my existing wall texture?

Yes. We match orange peel, knockdown, skip-trowel, hand-troweled, and smooth finishes, and we test on a small area before doing the full repair. Sometimes an exact match isn't possible, usually because the original product is discontinued or the wall has been repainted many times. When that happens, we'll tell you upfront and recommend retexturing the whole wall or ceiling instead of leaving a patch that almost matches.

Can you fix drywall after storm or hail damage?

Yes. When wind or hail damages a roof, water often gets into the attic and comes through the ceiling days or weeks later. We remove the wet board, check the joists and insulation for moisture, and install new drywall once the cavity is dry. We never patch over wet drywall. Get the roof fixed first, or the ceiling will fail again and you'll pay twice.

How much does drywall repair cost in Broken Arrow?

It depends on how big the damage is, how many separate repairs there are, whether it's a wall or a ceiling, and how hard your texture is to match. Small patches are at the low end. Ceiling work and repairs across several rooms cost more because of access and cure time. We quote every job in person after seeing the damage. Anyone quoting drywall repair over the phone is guessing.

Do you offer free estimates?

Yes. Call (918) 359-4011 to schedule. We'll come to you, assess the damage, and give you a written breakdown before any work starts.

Call now Free estimate